Только что получил вот такой девайс, купленный на ибее, покритикуйте:
KECES DA-131 (made in Taiwan)
*Fully supports 24bits/192KHz with Cirrus Logic's CS8416 receiver IC, unlike most DACs that is restricted to 24bits/96KHz due to the use of CS8414, even if they had used a 24bit/192KHz capable DAC.
*Supports both TOSLINK optical input and Coaxial RCA input, we use CS8416's internal signal select feature instead of the noisy/jittery mechanical switch or relay for signal selection. The switch you see in the back is simply for ordering CS8416 to read which of its input.
*Audiophile Grade Burr Brown PCM1793 DAC IC and two BurrBrown OPA604 as output filter OP
*NO SIGNAL COUPLING CAPACITOR ANYWHERE in the analog signal from the DAC all the way to the RCA connectors. Ensuring the highest quality sound with no capacitor in the signal path to color or change the sound in any way.
*Standard 2VRMS analog output, exactly as what most high end CD player do.
*Highly regulated and independent power supply for each section of the DAC and OP, fully shield each section of DAC from interfering each other.
*Audiophile/Military Grade Resistors and Capacitors, all in the name of higher quality sound.
*High Quality gold plated RCA connector with Teflon insulated Silver plated copper wire.
Звук сравниваю с имеющимся Cambridge Audio DAC-X3. Пока что принципиальной разницы не заметил.
KECES DA-131 (made in Taiwan)
*Fully supports 24bits/192KHz with Cirrus Logic's CS8416 receiver IC, unlike most DACs that is restricted to 24bits/96KHz due to the use of CS8414, even if they had used a 24bit/192KHz capable DAC.
*Supports both TOSLINK optical input and Coaxial RCA input, we use CS8416's internal signal select feature instead of the noisy/jittery mechanical switch or relay for signal selection. The switch you see in the back is simply for ordering CS8416 to read which of its input.
*Audiophile Grade Burr Brown PCM1793 DAC IC and two BurrBrown OPA604 as output filter OP
*NO SIGNAL COUPLING CAPACITOR ANYWHERE in the analog signal from the DAC all the way to the RCA connectors. Ensuring the highest quality sound with no capacitor in the signal path to color or change the sound in any way.
*Standard 2VRMS analog output, exactly as what most high end CD player do.
*Highly regulated and independent power supply for each section of the DAC and OP, fully shield each section of DAC from interfering each other.
*Audiophile/Military Grade Resistors and Capacitors, all in the name of higher quality sound.
*High Quality gold plated RCA connector with Teflon insulated Silver plated copper wire.
Звук сравниваю с имеющимся Cambridge Audio DAC-X3. Пока что принципиальной разницы не заметил.
))