немного относительно свежих измерений пио 84тх:
Five channels driven continuously into 8-ohm loads:
0.1% distortion at 130.3 watts
1% distortion at 160.9 watts
All channels driven continuously into 8-ohm loads:
0.1% distortion at 122.0 watts
1% distortion at 141.2 watts
Analog frequency response in Pure Direct mode:
–0.24 dB at 10 Hz; –0.08 dB at 20 Hz
–0.16 dB at 20 kHz; –0.92 dB at 50 kHz
Analog frequency response with signal processing:
–1.62 dB at 10 Hz; –0.49 dB at 20 Hz
–0.27 dB at 20 kHz; –11.94 dB at 50 kHz
This graph shows that the VSX-84TXSi's left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 187.3 watts and 1 percent distortion at 213.8 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 239.4 watts and 1 percent distortion at 327.5 watts.
Response from the multichannel input to the speaker output measures –0.23 dB at 10 Hz, –0.07 dB at 20 Hz, –0.16 dB at 20 kHz, and –0.93 dB at 50 kHz. THD+N from the amplifier was less than 0.007 percent at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –77.25 dB left to right and –76.48 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was –102.75 dBrA.
From the Dolby Digital input to the loudspeaker output, the left channel measures –0.39 dB at 20 Hz and –0.27 dB at 20 kHz. The center channel measures –0.09 dB at 20 Hz and –0.25 dB at 20 kHz, and the left surround channel measures –0.08 dB at 20 Hz and –0.18 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is –0.02 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 110 Hz and the upper 6-dB down point at 118 Hz.—MJP
интересно сравнить со старым 72тх:
Five channels driven continuously into 8-ohm loads:
0.1% distortion at 143.7 watts
1% distortion at 161.3 watts
Analog frequency response in Analog Direct mode:
–0.24 dB at 10 Hz; –0.08 dB at 20 Hz
–0.21 dB at 20 kHz; –1.21 dB at 50 kHz
Analog frequency response with signal processing:
–1.61 dB at 10 Hz; –0.49 dB at 20 Hz
–0.34 dB at 20 kHz; –12.10 dB at 50 kHz
This graph shows that the VSX-72TXV's left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 175.6 watts and 1 percent distortion at 200.2 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 212.2 watts and 1 percent distortion at 261.3 watts.
Response from the multichannel input to the speaker output measures –0.23 dB at 10 Hz, –0.07 dB at 20 Hz, –0.20 dB at 20 kHz, and –1.21 dB at 50 kHz. THD+N from the amplifier was less than 0.009 percent at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –74.21 dB left to right and –76.97 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was –102.80 dBrA.
From the Dolby Digital input to the loudspeaker output, the left channel measures –0.36 dB at 20 Hz and –0.30 dB at 20 kHz. The center channel measures –0.04 dB at 20 Hz and –0.27 dB at 20 kHz, and the left surround channel measures –0.05 dB at 20 Hz and –0.28 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is +0.02 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 117 Hz and the upper 6-dB down point at 120 Hz.—MJP
Five channels driven continuously into 8-ohm loads:
0.1% distortion at 130.3 watts
1% distortion at 160.9 watts
All channels driven continuously into 8-ohm loads:
0.1% distortion at 122.0 watts
1% distortion at 141.2 watts
Analog frequency response in Pure Direct mode:
–0.24 dB at 10 Hz; –0.08 dB at 20 Hz
–0.16 dB at 20 kHz; –0.92 dB at 50 kHz
Analog frequency response with signal processing:
–1.62 dB at 10 Hz; –0.49 dB at 20 Hz
–0.27 dB at 20 kHz; –11.94 dB at 50 kHz
This graph shows that the VSX-84TXSi's left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 187.3 watts and 1 percent distortion at 213.8 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 239.4 watts and 1 percent distortion at 327.5 watts.
Response from the multichannel input to the speaker output measures –0.23 dB at 10 Hz, –0.07 dB at 20 Hz, –0.16 dB at 20 kHz, and –0.93 dB at 50 kHz. THD+N from the amplifier was less than 0.007 percent at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –77.25 dB left to right and –76.48 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was –102.75 dBrA.
From the Dolby Digital input to the loudspeaker output, the left channel measures –0.39 dB at 20 Hz and –0.27 dB at 20 kHz. The center channel measures –0.09 dB at 20 Hz and –0.25 dB at 20 kHz, and the left surround channel measures –0.08 dB at 20 Hz and –0.18 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is –0.02 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 110 Hz and the upper 6-dB down point at 118 Hz.—MJP
интересно сравнить со старым 72тх:
Five channels driven continuously into 8-ohm loads:
0.1% distortion at 143.7 watts
1% distortion at 161.3 watts
Analog frequency response in Analog Direct mode:
–0.24 dB at 10 Hz; –0.08 dB at 20 Hz
–0.21 dB at 20 kHz; –1.21 dB at 50 kHz
Analog frequency response with signal processing:
–1.61 dB at 10 Hz; –0.49 dB at 20 Hz
–0.34 dB at 20 kHz; –12.10 dB at 50 kHz
This graph shows that the VSX-72TXV's left channel, from CD input to speaker output with two channels driving 8-ohm loads, reaches 0.1 percent distortion at 175.6 watts and 1 percent distortion at 200.2 watts. Into 4 ohms, the amplifier reaches 0.1 percent distortion at 212.2 watts and 1 percent distortion at 261.3 watts.
Response from the multichannel input to the speaker output measures –0.23 dB at 10 Hz, –0.07 dB at 20 Hz, –0.20 dB at 20 kHz, and –1.21 dB at 50 kHz. THD+N from the amplifier was less than 0.009 percent at 1 kHz when driving 2.83 volts into an 8-ohm load. Crosstalk at 1 kHz driving 2.83 volts into an 8-ohm load was –74.21 dB left to right and –76.97 dB right to left. The signal-to-noise ratio with 2.83 volts driving an 8-ohm load from 10 Hz to 24 kHz with "A" weighting was –102.80 dBrA.
From the Dolby Digital input to the loudspeaker output, the left channel measures –0.36 dB at 20 Hz and –0.30 dB at 20 kHz. The center channel measures –0.04 dB at 20 Hz and –0.27 dB at 20 kHz, and the left surround channel measures –0.05 dB at 20 Hz and –0.28 dB at 20 kHz. From the Dolby Digital input to the line-level output, the LFE channel is +0.02 dB at 20 Hz when referenced to the level at 40 Hz and reaches the upper 3-dB down point at 117 Hz and the upper 6-dB down point at 120 Hz.—MJP
