Архив Форума Hi-Fi.ru
По 23-5-2020
Портал Hi-Fi.ru более не предоставляет возможностей и сервисов по общению пользователей


Страницы: Пред. 1 ... 27 28 29 30 31 ... 36 След.

Onkyo 905

 
 
Изменения :
Supposed to fix DTS HD-MA "bomb" / digital garbage issue (DSP).
Supposed to improve / fix audio switching delay and lipsync issues (Main).
 
 

Цитата
Supposed to improve / fix audio switching delay and lipsync issues (Main).
lipsync не убрал, но стал заметно лучше. Audio Switching намного быстрее. Раньше занимало около 2-х секунд при переходе с DD на PCM. Многих раздражало при просмотре HD каналов, когда включалась реклама или скорее после рекламы не слышно было звуковой дорожки несколько секунд. Реклама как правило не в DD.  
 
 
ух ты и 805й можно прошить! сегодня-завтра попробую.
Цитата
Audio Switching намного быстрее
а у 805го интересно станет быстрее - или это только для 875-905х в спец прошивках?
 
 
Если нужно :
Main Update Onkyo 805 ONLY (1.08) :
http://rapidshare.de/files/39534617/805_MainFirmware108.zip.html
 
 

Цитата
DSP Update Onkyo 705 / 805 / 875 / 905 :
http://rapidshare.de/files/38949782/DSP_UPG_TX_705_-_905.zip.html
xt то у меня эта прошивка не ставится никак - горит на дисплее SPDIF Update и ничего не происходит
 
 
Инструкция :
DSP firmware update: The firmware resides inside a .WAV file (!), which needs to be burned onto an audio CD and played back through a CD/DVD-player connected by an optical link (TOSLINK) to Opt1. There must be a one-to-one copy of the file and it must be transfered unmodified. Most older CD/DVD player will work just fine

TX SR 705 – SR 875 and TX NR 905:
Within 3 seconds, press the Tone “ +“ button. Now the display showing the DSP 1 st firmware version,
press the “Return” button on the Receiver, then press Play on the CD Player. The Receiver’s display
will now say “S/PDIF Update…” for about 15 seconds then “Writing 1 st DSP…” for about 15 seconds,
than again S/DIF Update. Now you see “Writing 2 st DSP…” than again S/DIF Update before it
changes to “Writing 3 st DSP…” When the writing process has finished the display will say
“Complete!”, then “Clear”, then the Receiver will go to Standby mode. It is possible, that the unit will
not switch OFF automatically, in this case wait for another 10 minutes before switching OFF manually.

1) TO STORE SETTINGS (must be done first, otherwise the recall will not have anything to recall):
1) Turn the unit on.
2) From the front panel- Push and hold "Setup", then Push "Enter".
3) The unit will display "Setup Store?", push "Enter" again and the unit will display "Setup Storing", then it will display "Complete" and thus the procedure is complete.  
 
 
это вы мне? да я прочитал и всё именно так и сделал - только дисплей показывает SPDIF Update...  и все никаких там "Writing 1 st DSP". Диск записал - поставил в плеер (онкио кстати тоже 504й - не думаю что онкиовский плеер не подходит для их же прошивки и с тошибы 35й пробовал - результат нулевой (подключал как и сказано на оптику1)
 
 
Попробуй записать WAV файл в другой проге.  
 
 
да болванок жалко - у меня перезаписываемых нету, писал нерой, делал именно аудио CD
 
 
хрен с ней с этой прошивкой
Страницы: Пред. 1 ... 27 28 29 30 31 ... 36 След.
Архив Форума Hi-Fi.ru
По 23-5-2020
Портал Hi-Fi.ru более не предоставляет возможностей и сервисов по общению пользователей

1997—2025 © Hi-Fi.ru (Лицензионное соглашение)