Перевод DVD Nad T550 во всерегиональный режим

Говорит и показывает всемирный разум. По поиску не всерегиональный а multizone nad t550 hack находится следующее

Make sure tray is open.
Go to [set up] menu.
Go to 'password' press [enter].
Input "5978"
Press [enter]; a block with "SVC Code" will appear.
Input "92" [Audio] [Resume]" (yes, this means two digits and two special keys as the mode).
Press [Enter] The block will now show "Region Change 0000"
Select region by input: "550* " where * = region code. E.g USA = 5501; Europe = 5502.
Press [Enter]. The player will close the drawer and switch itself to standby.



На этом всемирные мысли кончаются - удачи.  

Как и обещал (HELP)
Important news regarding NAD T550 DVD player pleas pass on to all relevant people in your organisation.
_________________________________________
The following procedure works with Nad t500 software version 000620.bin (releised June 2002) or after.
To make T550 play all regions:
After uploading 000620.bin sowtware or higher:
1. PC monitorsays "write OK"
2. Press POWER button on T550 to swetch to STAND BY
3. Press OPEN button of T550;  PC monitor says "Invoking No Disc Manager"
4. Press The PC keyboard "enter" : PC monitor say "Harish>"
5. Input "setcode ALL" after "Harish>" prompt NOTE THAT THIS IS CASE SENSITIVE!
6. On PC monitor it will now say "Harish> setcode ALL"; press enter on PC keyboard
7. "OK" will appear on PC monitor

To double-check the software and region setting were uploaded properly:
Input "getcode" after the "Harish>" prompt. On PC monitor" Region Code: unknown (0x30)" will appear.

After switching T550 to STAND-BY and ON the region setting is completed.

Разъясните плииз эту шнягу......