| Цитата |
|---|
| Сегодня целый час мучал Денон-2930 на 5000-й плазме. Никак не могу выставить разрешение 1080р. Максимум, что показывает дисплей, это 576р. |
Там, вроде, в меню должен быть пункт в Setting the HDMI auto format-MAX RESolution, может его выставить?
Может вот это из мэнуала поможет:Changing the resolution
¢When the signal format is set to “YCbCr” or
“RGB”
AUTO:
The performance of the HDMI device connected to the HDMI
terminal is detected automatically and the resolution for its panel’s
pixel number or the maximum resolution that can be input is output.
The output resolution is set at “HDMI AUTO FORMAT” under
“digital interface setting” ( page 19).
480/576i, 480/576P (Upon purchase), 720P, 1080i, 1080P:
The video signal from the HDMI terminal is converted to the
selected resolution for output.
The video output when “480/576i” is selected is 480i for NTSC,
576i for PAL.
The video output when “480/576P” is selected is 480P for NTSC,
576P for PAL.
• The resolution is the same for “YCbCr” and “RGB”.
Похоже по умолчанию в Деноне стоит 480/576
[small]Отредактировано: 12-10-2006, 10:33[/small]

(( Сейчас в И-нет-магазинах "модно" писать все подряд, а потом...